What's does IP65 waterproof 3528 Led Lights mean?

aterproof... well it depends... see this [...] IP65 means you can spray water on it. If you want to fully submerse something, you need IP68 FULLY SUBMERSIBLE which states immersion > 30 minutes. I put these in a shallow ornamental pool. (I kept both ends fully out of the water). It failed after a few days. The back of the led strip has a peel off sticky tape that has bare solder pads every 3rd led. Marks under the sticky shows that water seeped in and reacted with the copper pads. Again, I did not know that IP65 waterproof did not mean you can't immerse it. Luckily I only used 8ft, so I took the remainder, soldered on new end and put it within clear plastic tubing and sealed both ends (still keeping the ends out of the pond, spray painted tubing ends out of the water. This seems to work. But I could have done the same thing to a 'not waterproof' led strip and gotten the same effect for cheaper. I am sure I will get comments like "you should have done your homework before buying". If so, that's fine, however this review may save others a problem and some money. Yes I got what I ordered, I just didn't know it wasn't what I wanted.

How to choose and install the LED lights for your boat, if 3M adhesive backing of LED strips doesn't work?

1.Choose DC 12V waterproof 3528 Flexible Lighting led strips.Led lights are very bright and really bring the bait fish in.

2.The most common problem people seem to have is LED strips not sticking to the surface. It's ALL about prep. You can't just "stick em on" and expect them to hold. Like anything, clean the surface good and make sure you get all of the dirt, wax, and oils off the surface. I used starting fluid sprayed on a rag before applying them to my boat. Two months later of being off and on the water they are holding up as good as the day I put them on. Plenty bright on the water at night. A lot brighter than I though they would be. The green lights placed just under the outer gunwale works well for fishing and drawing baitfish to the boat, but the light is not oppressive to spook fish. Face the light OUT, and not down. After about 20-30 minutes and baitfish had moved in we could see the predator fish in the 20" range start moving through.

3.If 3M Adhesive backing doesn't hold very well. Use Automotive weatherstrip adhesive or buying an epoxy for this kind of application.

SUPERNIGHT® 3528SMD Plug in Led Strips AC 110V High Voltage Series LED Strip Lights Indoor Rope Light Kit Christmas Lighting Outdoor Rope Lighting

They are called SMD3528 because the dimension of the chip is 3.5mm * 2.8mm. These LED chips (one LED per chip) are bright but not as bright as the 5050 side by side but when used in higher quantity can be brighter then a comparible strip of 5050s.

These lights are great for TV backlighting, color splashing walls, accent lighting for crown molding and pictures, under tables and cabinets, bars, etc.

3528 LEDs can be most cost effective, but will not be as bright when compared individually to a 5050 chip, but when there are 600 of them on a reel, they can be brighter than a 5050 strip.

LED Controller IR controller vs RF controller

LED IR controller

Controlled by radio-frequency capacitive touch,the operating principle of LED IR controller is similar as TV Remoter， effective control distance up to 10m,also the remoter should be in the straight line to the receiver. There should be no barrier between them.

LED RF controller 

It's Wireless Remote, much similar as cell phone,no barrier limited,no direction limited,effective control distance up to 50m.

In conclusion,DC 12 V led strip is not so easy to use.

Choose the New Arrival 110V AC powered led strips, no complicated controller needed.

SUPERNIGHT® 3528SMD AC 110V High Voltage Series LED Strip Lights Indoor Rope Light Kit Christmas Lighting Outdoor Rope Lighting

 


 

How to calculate the watts of LED STRIP?

There are many different varieties of LED strip lights, 3528 and 5050SMD LED strip are the most common ones.

The watts is usually measured per one metre of the LED strip.

The most common watts per metre LED strip on the market today for 3528LED is 4.8 watts per meter.That's say 4.8watts per 3.3 feet.


5050LED is 14.4 watts p/m.


The total amount of watts for your LED strip would then be worked out by multiplying the wattage p/m by the overall length of your LED strip.
The wattage of the LED strip usually determines the brightness of the LED strip. Usually the higher the wattage, the higher the output. Output is measured in lumens.

What's the difference between 3528 LEDs and 5050 LEDs High Voltage 110V Led strips?

The difference between 3528 LEDs and 5050 LEDs

What are SMD 3528 and SMD 5050 LEDs?

Here's an easy-to-understand comparison between the two LED chips. (Hint: the numbers are only the size of the chip!)

LED strip lighting can be manufactured with a variety of LED chips. The numbers you see such as 3528 and 5050 refer to the size of the chip. The older style strips that have been popular for a few years now are the sizes seen above. Currently, there are even smaller and more efficient LED chips on the market with the sizes of 2835, 3014, 5630, and 3020. 

----------------------------------------------------------------------------------------------------------------------------------------------------

So how to choose SMD 5050 and 3528 LED Strip Lights?

They are used when you need high illumination for your project area and especially RGB color changing lights. Theoretically, SMD 5050 LEDs can offer a light output 3 times that of the 3528 strips, and therefore the 5050 LED is well suited for lighting up areas that may be subject to high levels of ambient light. However, since they are larger in size, there are only so many you can fit onto the PCB. There are some brightness restraints when using the 5050s in this way.

Though they produce more heat than smaller chips, it is still drastically lower than other lighting options. These types of LEDs require a thicker PCB to draw the heat away form the chips.

The 5050's are different from the 3528 LEDs in that 5050s can combine the three different chips to inside the housing to create millions of color variations. 

While the 5050 chip can be used in single color applications, we have found the 5050 LEDs to be better for the RGB and the 3528 SMD LEDs in high density better for single color applications.

                                  Now Choose SUPERNIGHT NEW ARRIVAL Plug in 5050 RGB Led Strips

 

SUPERNIGHT® 10Ft/3m Length 5050SMD 110V High Voltage LED Strip Light RGB Color Changing LED Rope Light IP67 Waterproof Outdoor String Light Festival Wedding Party Christmas Halloween Decorative LED Lighting RGB Color Changing

How to mount the DC 12V RGB strip light?

It's a little confused when mounting the DC 12V RGB strip lights. Below is the explanation image.

SUPERNIGHT 5M 3528SMD 110V LED Strip Lights Flat Rope Lights Warm White High Voltage Under Cabinet Led Ribbon Flat Rope Wedding Festival Led

Different people must have the different kind of need as well, as we all know there are lots of things that you might see on the market, but it could be possible that BINZET 5M 3528SMD 110V LED Strip Lights Rope Lights-Warm White is the one that you are looking for. In this case, this product must be the kind of important things for you, that is why you are going to collect it while it is still available in the market and also since it is the things that you really need.


It is called an amazing thing when you can find the suitable SUPERNIGHT 5M 3528SMD 110V LED Strip Lights Rope Lights-Warm White when you are really need it. As we are now in the technology era, finding this kind of things is not that difficult all you have to do is to be able to utilize the gadget that you have, connect it to the internet and there you will have what you are looking for just in no time. However, since different people have different need so, not all the product can be found that easily.

Sometimes you need to pay high in order to get what you want, it is included having this SUPERNIGHT 5M 3528SMD 110V LED Strip Lights Rope Lights-Warm White. But you do not have to worry, because mostly the thing with the high price also worth it. So, make sure that what you pay and also the benefit or advantage that you get is paid off or fair enough. And if you want to learn more about his kind of product the pros and cons or anything related to this product then you can find it easily if you follow the link.

What's the difference between SUPERNIGHT BRAND AC 110V High Voltage Led Strips and DC 12V Low Voltage Led Strips?

SUPERNIGHT®AC 110V/120V led strip is known for it's easily installation. No Adapter needed,plug and play.IP67 Waterproof and weatherproof,easily be cleaned.Also Eco-friendly no splash or UV,no mercury,no harm to human.

1.With 1 Power Cord,High power strip light 110V Led Strip can work max length 164ft/50M.Very Easy and convient for indoor and outdoor projects.No need to cut the length as the strips can be joint to get increased length.

2.High power strip light 110V Led Strips is very suitable for indoor and outdoor lighting projects.


3)Low voltage strip light can be worked short distance is short 15M, used more drivers, the cost is high. It would be safe if installed in water and indoor. less heat, more longer lifespan, lower lummen drop.It can be cut every 3LEDS.

How to install led strip light?The most easy way to install LED strip light.

The most easy mounted LED strip is 110V High Voltage Led Strip 3528SMD 110V Led Strip Lights, Plug in, then it can be used.

• 110V AC Powered, no adapter needed, just plug and play
• Length: 3.3'/9.8'/16.4'(1m/3m/5m).Easily length joint.(Max.164ft).
• 6 Solid Colors Avaiable.Free color combination.
• Low heat emitting: solid light source and resiniferous package to make low heat
• Eco-friendly: no splash and UV, without mercury and no damage to human and environment

Choose Amazon to buy this High Quality LED Strip.

SUPERNIGHT® 16.4Feet/5m Length 3528SMD AC 110V High Voltage Series LED Strip Lights Indoor Rope Light Kit Christmas Lighting Outdoor Rope Lighting